Removed some hyperlinks and cleaned up a few codeblocks

09 - Linux Security Concepts/Filesystem Security (eCryptFS).md

@@ -17,18 +17,14 @@ Key features:
 
 On most Linux distributions, eCryptfs can be installed using the package manager:
 
-```bash
+For Ubuntu/Debian:
-# For Ubuntu/Debian:
+`sudo apt-get install ecryptfs-utils`
-sudo apt-get install ecryptfs-utils
+
-```
+For Fedora:
-```bash
+`sudo dnf install ecryptfs-utils`
-# For Fedora:
+
-sudo dnf install ecryptfs-utils
+For Arch Linux:
-```
+`sudo pacman -S ecryptfs-utils`
-```bash
-# For Arch Linux:
-sudo pacman -S ecryptfs-utils
-```
 
 ## 3. Setting up eCryptfs
 
@@ -66,15 +62,11 @@ mount -t ecryptfs ~/encrypted ~/encrypted
 
 ### - Unmounting:
 
-```bash
+`umount ~/encrypted`
-umount ~/encrypted
-```
 
 ### - Checking mount status:
 
-```bash
+`mount | grep ecryptfs`
-mount | grep ecryptfs
-```
 
 ## 5. Key Management
 
@@ -82,15 +74,11 @@ eCryptfs uses a passphrase to derive the encryption key. This passphrase is stor
 
 ### - Adding a key to the keyring:
 
-```bash
+`ecryptfs-add-passphrase`
-ecryptfs-add-passphrase
-```
 
 ### - Removing a key from the keyring:
 
-```bash
+`keyctl purge user ecryptfs`
-keyctl purge user ecryptfs
-```
 
 ## 6. Advanced Features
 
@@ -98,15 +86,11 @@ keyctl purge user ecryptfs
 
 Create a file containing your mount options:
 
-```bash
+`echo "passphrase_passwd=your_passphrase" > ~/.ecryptfsrc`
-echo "passphrase_passwd=your_passphrase" > ~/.ecryptfsrc
-```
 
 Then mount using:
 
-```bash
+`mount -t ecryptfs -o conf=~/.ecryptfsrc ~/encrypted ~/encrypted`
-mount -t ecryptfs -o conf=~/.ecryptfsrc ~/encrypted ~/encrypted
-```
 
 ### - Using different encryption for different directories:
 
@@ -125,15 +109,11 @@ You can mount multiple eCryptfs directories with different encryption settings b
 
 If you can't mount the filesystem, check if the required kernel modules are loaded:
 
-```bash
+`lsmod | grep ecryptfs`
-lsmod | grep ecryptfs
-```
 
 If not present, load them:
 
-```bash
+`sudo modprobe ecryptfs`
-sudo modprobe ecryptfs
-```
 
 ## !!!If you forget your passphrase, there's no way to recover the data. Always keep secure backups!!!
 

09 - Linux Security Concepts/Network Security (OpenSSL).md

@@ -16,36 +16,28 @@ OpenSSL is a robust, full-featured open-source toolkit that implements the Secur
 OpenSSL is available for various operating systems. Here are basic installation instructions:
 
 - Linux: Most distributions come with OpenSSL pre-installed. If not, use package managers:
-  ```bash
+  `sudo apt-get install openssl libssl-dev  # For Debian/Ubuntu`
-  sudo apt-get install openssl libssl-dev  # For Debian/Ubuntu
+
-  ```
+  `sudo yum install openssl openssl-devel   # For CentOS/RHEL`
-  ```bash
-  sudo yum install openssl openssl-devel   # For CentOS/RHEL
-  ```
 
 - macOS: Use Homebrew:
-  ```
+  `brew install openssl`
-  brew install openssl
-  ```
 
 - Windows: Download the installer from the official OpenSSL website.
 
 ## 4. Basic OpenSSL Commands
 
 - Generate a private key:
-  ```bash
+
-  openssl genrsa -out private.key 2048
+  `openssl genrsa -out private.key 2048`
-  ```
 
 - Create a Certificate Signing Request (CSR):
-  ```bash
+
-  openssl req -new -key private.key -out certificate.csr
+  `openssl req -new -key private.key -out certificate.csr`
-  ```
 
 - Generate a self-signed certificate:
-  ```bash
+
-  openssl req -x509 -newkey rsa:4096 -keyout key.pem -out cert.pem -days 365
+  `openssl req -x509 -newkey rsa:4096 -keyout key.pem -out cert.pem -days 365`
-  ```
 
 ## 5. Implementing SSL/TLS in Network Applications
 

09 - Linux Security Concepts/Security Tools (Fail2Ban, AIDE).md

@@ -11,10 +11,7 @@ Fail2Ban is an intrusion prevention software framework that protects Linux syste
 - Updates firewall rules to block banned IPs
 
 ### Installation:
-```bash
+`sudo apt-get update && sudo apt-get install fail2ban`
-sudo apt-get update
-sudo apt-get install fail2ban
-```
 
 ### Configuration:
 - Main configuration file: `/etc/fail2ban/jail.conf`
@@ -56,10 +53,7 @@ AIDE is a file and directory integrity checker that detects unauthorized changes
 - Reports any discrepancies, indicating potential security breaches
 
 ### Installation:
-```bash
+`sudo apt-get update && sudo apt-get install aide`
-sudo apt-get update
-sudo apt-get install aide
-```
 
 ### Configuration:
 - Main configuration file: /etc/aide/aide.conf

09 - Linux Security Concepts/Understanding SELinux.md

@@ -18,17 +18,13 @@ SELinux operates in three modes:
 - Disabled: SELinux is turned off
 
 To check the current mode:
-```
+`getenforce`
-getenforce
-```
 
 To change modes temporarily:
-```bash
+
-setenforce 0 # Set to permissive
+`setenforce 0` # Set to permissive
-```
+
-```bash
+`setenforce 1` # Set to enforcing
-setenforce 1 # Set to enforcing
-```
 
 To change modes permanently, edit /etc/selinux/config and reboot.
 
@@ -43,10 +39,11 @@ system_u:object_r:httpd_sys_content_t:s0
 ```
 
 To view contexts:
-```
+
-ls -Z # For files
+`ls -Z` # For files
-ps auxZ # For processes
+
-```
+`ps auxZ` # For processes
+
 
 ## 4. SELinux Policies
 
@@ -59,84 +56,56 @@ SELinux uses policies to define allowed actions. Two main policy types:
 Booleans are on/off switches that allow runtime customization of SELinux policies.
 
 To list all booleans:
-```
+`getsebool -a`
-getsebool -a
-```
 
 To change a boolean:
-```bash
+`setsebool httpd_can_network_connect on`
-setsebool httpd_can_network_connect on
-```
 
 To make the change persistent:
-```bash
+`setsebool -P httpd_can_network_connect on`
-setsebool -P httpd_can_network_connect on
-```
 
 ## 6. Troubleshooting SELinux
 
 - Check for denials:
-```
+`ausearch -m AVC,USER_AVC,SELINUX_ERR -ts recent`
-ausearch -m AVC,USER_AVC,SELINUX_ERR -ts recent
-```
 
 - Use SELinux troubleshooter:
-```
+`sealert -a /var/log/audit/audit.log`
-sealert -a /var/log/audit/audit.log
-```
 
 - Analyze SELinux logs:
-```
+`grep "SELinux" /var/log/messages`
-grep "SELinux" /var/log/messages
-```
 
 ## 7. File and Directory Labeling
 
 To change the SELinux context of a file or directory:
-```
+`chcon -t httpd_sys_content_t /path/to/file`
-chcon -t httpd_sys_content_t /path/to/file
-```
 
 To restore the default context:
-```
+`restorecon -v /path/to/file`
-restorecon -v /path/to/file
-```
 
 ## 8. Managing SELinux Modules
 
 List available modules:
-```
+`semodule -l`
-semodule -l
-```
 
 Enable a module:
-```
+`semodule -e modulename`
-semodule -e modulename
-```
 
 Disable a module:
-```
+`semodule -d modulename`
-semodule -d modulename
-```
 
 ## 9. Creating Custom SELinux Policies
 
 For complex environments, you may need to create custom policies:
 
 - Install policy development tools:
-```
+`yum install selinux-policy-devel`
-yum install selinux-policy-devel
-```
 
 - Write a policy module (.te file)
 - Compile and package the module:
-```
+`make -f /usr/share/selinux/devel/Makefile`
-make -f /usr/share/selinux/devel/Makefile
-```
 - Install the module:
-```
+`semodule -i mymodule.pp`
-semodule -i mymodule.pp
-```
 
 ## 10. SELinux and Containers
 
@@ -145,9 +114,7 @@ SELinux provides strong isolation for containers:
 - Prevents container processes from accessing host resources
 
 To run a container with a specific SELinux context:
-```
+`docker run --security-opt label=type:svirt_lxc_net_t my_image`
-docker run --security-opt label=type:svirt_lxc_net_t my_image
-```
 
 ## 11. Best Practices